RESTARTING AND RESETTING THE CBXi
The
CBXi
controller can be restarted or reset using the two switches located on the front panel (under
the flap) beside the LED:
RESETTING THE WEBUI LOGIN
If the
username / password or
WebUI
cannot log in to the
username:
•
admin
password:
•
cylonctl
IP address: based on serial number (see
•
To reset the
IP address
lights up, and then release SW1.
FULL FACTORY RESET
To restore all settings in the CBXi, including any strategy configuration, press SW1 while the controller is
booting, hold it until the
RESTARTING THE CONTROLLER WITHOUT POWER CYCLING
To restart the
CBXi
until the
LED
lights up, and then release SW2.
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
IP address
, you can reset them to known values, i.e.
WebUI
and password, press SW1 while the controller is running, hold it until the
LED
lights up, and then release SW1.
without disconnecting the power, press SW2 while the controller is running, hold it
CBXi IP Controller |
have been changed to unknown values so that you
Configuring the IP connection
CBXi Operation
on page 31)
LED
72