Tcp/Udp Ports - ABB CBXi Series User Manual

Restarting and Resetting the

TCP/UDP PORTS

This page defines
use.
HTTPS/HTTP are used for this web configuration.
• HTTPS is always enabled, though the port can be changed if required.
• HTTP is disabled by default.
The BACnet ports are needed if the controller must communicate with other
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
CBXi on page 72) will revert all IP configuration to factory defaults.
IP ports that are open to the outside world, and the protocols those ports expect to
CBXi IP Controller |
BACnet controllers over IP.
CBXi Web UI
22