Set Up The Cbxi And Connected Flx Modules In A Site In Cxproᴴᴰ - ABB CBXi Series User Manual

SET UP THE CBXI AND CONNECTED FLX MODULES IN A SITE IN CXPROᴴᴰ
On an MS/TP trunk, a
Networks section of the
Click the button, select the new
Add
Set the
Controller Type
Set the controller
Name
and if the CBX device has one or more
table:
Modules
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
CBXi device acts as a Router. Because of this,
dialog in CXproᴴᴰ's
Edit Controllers
Network that is created, and click the
to :
CBXi
, and
Device Instance Number
FLX modules connected to it, add the same number of entries in the
CBXi IP Controller |
CBXi controllers are configured in the
Configuration utility.
Edit
(for exporting to
IP Address : Port
Installation
button:
ASPECT® and INTEGRA™)
47