Add A Camera Position Preset - Cisco Desk User Manual

Camera control

Add a camera position preset

1
In or out of call, open the control panel
and tap the Camera button. Or, tap the
selfview image and then tap the Camera
button there. Select Manual under
Camera mode.
3
Name the preset and tap Done.
15505.01 Cisco Desk Series User Guide JANUARY 2023
All contents © 2023 Cisco Systems, Inc. All rights reserved
2
Use the controls to pan, tilt, and zoom
the camera. When you're done, tap Save
camera view.
4
Your preset is added to the Saved camera
views list and available for selection.
About camera presets
Manual camera controls let you
control the zoom, pan, and tilt of
the camera. When you adjust the
camera manually, if you like the
view you can save it to use again.
This means you can create custom
views with predefined zoom and
camera direction. You can easily
switch between presets during
meetings.
To apply a defined preset, open
the control panel, tap the Camera
button, and select it from the
Saved camera views list.
To delete a preset, tap the More
button beside it in the list, and then
select Delete view.
56