Specifications For Optional Power Supply Products; Table 8 Current Consumption Of Each Power Cord; Table 9 Specifications For Ac200V Power Cords (For The Emeia, Central American, And Caribbean Regions) - Fujitsu ETERNUS DX100 S4 Site Planning Manual

1. ETERNUS DX Installation
Outlet/Socket Specifications
■
Current Consumption
The following table shows the current consumption (guideline) of each power cord that is used for ETERNUS DX
connections.

Table 8 Current Consumption of Each Power Cord

Component name
Controller enclosure
2.5"/3.5" type drive enclosure
High-density drive enclosure
When using power distribution units, make sure that the current capacity totaling the current consumption val-
ue of power cords that connect to the enclosures does not exceed the actual usage rating of the power distribu-
tion unit.

Specifications for Optional Power Supply Products

This section explains the specifications of optional power cords and power related optional products.
For power distribution units, the number of outlets that are required to connect the controller enclosure and
drive enclosures should be taken into consideration, and the most appropriate power distribution units should
then be selected.
When an existing power socket is used, make sure that the plug type of the power distribution unit fits the exist-
ing power socket and that the power supply facility is able to provide sufficient power to the system. If the plug
type does not fit the power socket, electrical work to change the power socket is required. This electrical work
must be performed in compliance with the electrical codes of the nation, the municipality, or the region.
■
AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)
AC200V power cords are used to connect devices to the IEC60320 C13 power socket type. These power cords can
be used if the specifications of the connection device allow AC200V.

Table 9 Specifications for AC200V Power Cords (for the EMEIA, Central American, and Caribbean Regions)

Usage
Used for connection be-
tween the ETERNUS DX
and the socket
(IEC60320 C13 n
IEC60320 C14G)
FUJITSU Storage ETERNUS DX100 S4/DX200 S4, ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Site Planning Guide
Socket type
Plug type
(Socket)
IEC60320 C14G IEC60320 C13
30
Copyright 2021 FUJITSU LIMITED
Voltage
AC100V AC200V
6.3A 3.0A
5.3A 2.7A
7.5A 3.8A
Voltage rating/current
Cable length
rating
1.5m 250V 10A
P3AM-7632-18ENZ0