Switch/Slit Land Settings On The Boards - Sony BETACAM SX DNV-5 Maintenance Manual

1-9. Switch/Slit Land Settings on the Boards

1-9-1. AXM-14 Board
1-9. Switch/Slit Land Settings on the Boards
n
For the factory-use switch and slit land, do not change the switch and slit land settings.
1-9-1. AXM-14 Board
1
SL301
2
SL300
C
B
AXM-14 B Side
Slit Lands
Ref. No. Name
SL300 AUDIO OUT Select
SL301 AUDIO OUT Select
*1 : This slit land is short-circuited by the traces on the board. Therefore, the traces must be cut using a knife when the setting is
changed.
*2 : The modification of the unit is necessary for change of connector.
1-18
A
Description
OPEN : Outputs from the XLR 5-pin connector.
SHORT : Outputs from the XLR 3-pin connector.
OPEN : Outputs from the XLR 3-pin connector.
SHORT : Outputs from the XLR 5-pin connector.
Factory setting
OPEN
*2
*2 SHORT *1
DNV-5