Ma701 Default Wireless Configuration Settings - NETGEAR MA701 User Manual

User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701

MA701 Default Wireless Configuration Settings

If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless configuration and security parameters already defined.
Your NETGEAR 802.11b Wireless Compact Flash Card MA701 factory default basic settings are:
• Network Name Service Set Identification (SSID): Any (First available network)
Note: In order for the MA701 Wireless Compact Flash Card to communicate with a wireless
access point or wireless adapter, all devices must be configured with the same wireless
network name (SSID).
• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP encryption: Disabled
The section below provides instructions for setting up the NETGEAR 802.11b Wireless Compact
Flash Card MA701 for basic wireless connectivity to an access point. The procedures below
provide step-by-step installation instructions for Windows PCs. Use the procedure that
corresponds to the version of Windows you are using.
Basic Setup for a Notebook PC
M-10204-1
4-3