NETGEAR MA701 User Manual page 31

User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
The PDA does The IP Address
not get an IP has not taken
Address. effect yet.
Mismatched
network settings,
such as SSID and
WEP encryption.
The PDA does The MA701
not recognize Software may not
the MA701. be installed
properly.
The PDA may
need to be reset.
The battery power
may be too low.
The MA701 The SSID may be
cannot connect incorrect.
to a known
Mismatched WEP
Access Point
settings.
within range.
Incorrect Network
Mode.
The PDA cannot Incorrect setting
browse the web on PDA.
even when the
MA701 is
The IP address
associated with
may not be
an Access Point
correct.
correctly.
Basic Setup for a PDA
Remove and reinsert the MA701 Wireless CF Card or
turn off and then turn on the PDA.
Check and re-enter the same SSID and WEP settings
as Access Point.
Remove and then reinstall the MA701 Wireless CF
Card's Driver/Utility software.
Reset the PDA.
Recharge the battery.
Check and enter the correct SSID.
Check and make sure you have configured the same
WEP settings as the Access Point
Check to see if the MA701 Wireless CF Card is
configured in Infrastructure mode.
Under the Connections Settings in Windows, make
sure that you have selected the Internet option for the
"My network card connects to:" field.
Change to a known valid IP address or reset the PDA.
M-10204-1
3-11