Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NETGEAR powerline 500 XAVB5622
Summary of Contents for NETGEAR powerline 500 XAVB5622
- Page 1 Installation Powerline 500 Model XAVB5622...
-
Page 2: Package Contents
Package Contents In some regions, a resource CD is included with your product. Note: Adapters vary by region. Your adapter might look different. -
Page 3: Getting Started
Getting Started Powerline networking solutions give you an alternative to Ethernet-only or wireless networks by extending your signal using the electrical wiring. Plug two or more compatible Powerline 500 devices into electrical outlets to create or extend your wired home network. In addition to Powerline 500 devices, you can add Homeplug AV certified adapters, for a total of up to 16 devices. - Page 4 Meet Your Adapter Before you install your adapter, familiarize yourself with its LEDs, buttons, and port. Extra outlet Power LED Ethernet LED Pick A Plug LED Security button Factory Reset button Ethernet ports. One adapter has two ports, the other one.
- Page 5 Extra Outlet For information on outlet ratings and safety information, see Safety Information on page 12. Power LED Solid green. The electrical power is on. Blinking amber. The adapter is in power saving mode. Blinking green. The adapter is in the process of setting up security.
- Page 6 Press the Factory Reset button for one second, then release Factory Reset button it to return the Powerline adapter to its factory default settings. Ethernet port Connect your computers, networking equipment, and other equipment that uses an Ethernet cable, to your Powerline network.
- Page 7 Install Your Adapters Room 1 Room 2 Note: Do not plug the Powerline adapter into an extension cord.
- Page 8 Secure Your Network ¾ To create a secure network: 1. Plug in your new adapters. 2. Wait until the Pick A Plug LEDs are blinking. 3. Press the Security button for two seconds, then press the Security button on one of the other adapters in your existing network for two seconds.
- Page 9 Add Adapters To add adapters before you have configured the security feature, just plug them in and connect the adapters to your equipment. ¾ To add adapters to a Powerline network with security set: 1. Plug in and connect the new adapters. 2.
-
Page 10: Troubleshooting Tips
Troubleshooting Tips Power LED is off. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power LED is blinking Power saving mode occurs when the Ethernet LED is amber. - Page 11 Ethernet LED is off. • Make sure that the Ethernet cables are working and securely plugged into the devices. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings.
-
Page 12: Safety Information
Safety Information • For national approvals (approval schemes other than CB), relevant national standards for plug, socket-outlet, and direct plug-in units (for example, US) shall also be consulted while testing and approving such products according to national standards. • AC input rating (NA): 100–125V, 0.2A (max.); 50–60 Hz excluding socket-outlet rating. - Page 13 outlet; no other equipment with a direct plug-in is allowed. Power cord must be a maximum of 1 m long and a minimum of 0.75 mm square of cross-sectional area. • Do not plug devices that exceed the product ratings into the XAV5622 filtered AC outlet.
-
Page 16: Technical Support
Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.