How to Configure WEP
To configure WEP data encryption, follow these steps:
Note: If you use a wireless computer to configure WEP settings, you will be disconnected
when you click Apply. You must then either configure your wireless adapter to
match the wireless router WEP settings or access the wireless router from a wired
computer to make any further changes.
1. Log in to the WNR834B firewall at its default LAN address of
with its default user name of admin and default password of password, or using whatever
LAN address and password you have set up.
2. Click Wireless Settings in the main menu of the WNR834B firewall.
3. From the Security Options menu, select WEP. The WEP options display.
Wireless Configuration
RangeMax Next Wireless Router WNR834B Reference Manual
v1.0, April 2006
http://www.routerlogin.net
4-11