How To Configure Wep - NETGEAR MBR814X Reference Manual

• Manual. 64-bit WEP: Enter 10 hexadecimal digits (any combination of 0-9, a-f, or A-F).
128-bit WEP: Enter 26 hexadecimal digits (any combination of 0-9, a-f, or A-F).
Select the radio button for the key you want to make active.

How to Configure WEP

To configure WEP data encryption, follow these steps:
1. Log in to the MBR814X firewall at its default LAN address of
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
2. Click the Wireless Settings link in the main menu of the MBR814X router.
3. Go to the Security Encryption portion of the page:
Figure 4-6
4. Select the Authentication Type.
5. Select the Encryption setting.
6. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and Access Points in your
network.
• Automatic — enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
• Manual — enter hexadecimal digits (any combination of 0-9, a-f, or A-F).
Select which of the four keys will be active.
Reference Manual for the Mobile Broadband Router MBR814X
v1.0, January 2006
http://192.168.0.1 with its default
4-11