Using The Smart Setup Wizard - NETGEAR RangeMax Next WNR834B Reference Manual

Using the Smart Setup Wizard

You can use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection. The Smart Setup Wizard is not the same as the Smart Wizard configuration assistant
(as illustrated in Figure
you configure the wireless router, the Smart Wizard configuration assistant will not appear again.
To use the Smart Setup Wizard to assist with manual configuration or to verify the Internet
connection settings, follow this procedure:
1. Connect to the wireless router by typing
your browser, then click Enter.
2. For security reasons, the router has its own user name and password. When prompted, enter
admin
for the router user name and
letters. To change the password, see
Note: The router user name and password are not the same as any user name or
password you may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
WNR834B router and display the home page as shown in
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, use the
basic problems, or see
Connecting the Router to the Internet
RangeMax Next Wireless Router WNR834B Reference Manual
3-1) that only appears when the router is in its factory default state. After
http://www.routerlogin.net
password
"Changing the Administrator Password" on page
Chapter 8, "Troubleshooting".
v1.0, April 2006
in the address field of
for the router password, both in lower case
Figure 3-4 on page
"Troubleshooting Tips" on page 3-3
6-9.
3-5.
to correct
3-9