Configuring For Internet Access - NETGEAR MR314 Reference Manual

This chapter describes how to perform the basic configuration of your Model MR314 Cable/DSL
Wireless Router using the Setup Wizard, which walks you through the configuration process for
your Internet connection. This chapter also describes the configuration for content filtering and
reporting.
In order to use the browser-based Web Configuration Manager, your PC must have a web browser
program installed such as Microsoft Internet Explorer or Netscape Navigator. Because the
Configuration Manager uses Java, your Web browser must be Java-enabled and support HTTP
uploads. NETGEAR recommends using Netscape Navigator 3.0 or above. Free browser programs
are readily available for Windows, Macintosh, or UNIX/Linux.
If you will be using a wireless-connected PC to initially configure the router, you must access the
PC's wireless adapter configuration and set the ESSID to the router's default ESSID:
(note the capitalization). Also, you must disable WEP encryption.
To configure for Internet access using your browser:
Turn on the router and wait for initialization to complete.
1.
Allow at least one minute and verify that the TEST LED is off.
Reboot your PC to obtain DHCP configuration from the router.
2.
Launch your web browser.
3.
In the Address box of your browser, type
4.
and press ENTER.