NETGEAR 7000 Series Managed Switch Administration Guide
Example #1 Configuring an Inter-Area Router
Figure 5-5
Enable Routing for the Switch. The following command sequence enables ip routing for the
switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit
Assign IP Addresses for Ports. The following sequence enables routing and assigns IP
addresses for ports 1/2/2 and 1/2/3:
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 1/2/2
(Netgear Switch) (Interface 1/2/2)#routing
(Netgear Switch) (Interface 1/2/2)#ip address 192.150.2.1 255.255.255.0
(Netgear Switch) (Interface 1/2/2)#exit
(Netgear Switch) (Config)#interface 1/2/3
(Netgear Switch) (Interface 1/2/3)#routing
(Netgear Switch) (Interface 1/2/3)#ip address 192.150.3.1 255.255.255.0
(Netgear Switch) (Interface 1/2/3)#exit
(Netgear Switch) (Config)#exit
5-20
v1.0, March 2006
IP Routing Services