NETGEAR ProSafe FSM7328S Administration Manual page 23

Table 1-1. Quick Start Commands
Command
copy nvram:error-
log <tftp://
<ipaddress>/
<filepath>/<file-
name>>
copy nvram:tra-
plog <tftp://
<ipaddress>/
<filepath>/<file-
name>>
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>>
nvram:startup-
config
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>> sys-
tem:image
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>>
nvram:startup-
config
Getting Started
NETGEAR 7000 Series Managed Switch Administration Guide
Mode
Privileged Starts the error log upload, displays the mode and type of
EXEC upload and confirms the upload is progressing.
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Starts the trap log upload, displays the mode and type of upload
EXEC and confirms the upload is progressing.
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Sets the destination (download) datatype to be an image (sys-
EXEC tem:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:<filepath>/<filename>
For example:
If the user is using Hyper Terminal, the user must specify which
file is to be sent to the networking device.
The Networking Device restarts automatically once the code
has been downloaded.
Privileged Sets the destination (download) datatype to be an image (sys-
EXEC tem:image) or a configuration file (nvram:startup-config).
The URL must be specified as:
xmodem:<filepath>/<filename>
Privileged Sets the destination (download) datatype to be a configuration
EXEC file.
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
Before starting a TFTP server download, you must configure
the IP address.
v1.0, March 2006
Description
1-9