NETGEAR FR114P Reference Manual page 91

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Open Start -> Settings -> Control Panel -> Add/Remove Programs.
a.
Look for an entry with a name like "NETGEAR ProSafe Firewall Router", "NETGEAR
b.
Print Server", "Print Server Driver" or "Print Server Port".
Select this item, click Add/Remove, and confirm the deletion.
c.
I am using Windows 95. The Printer Driver installed and ran, but when I selected a port and
clicked Add, the printer was not installed.
Try installing the printer using the standard Windows tools, as follows:
From Start -> Settings, open the Printers folder, and start the Add Printer Wizard.
a.
When prompted, select Network Printer and click Next.
b.
For Network Path or Queue, enter a dummy value such as \\123, as shown below.
c.
Select NO for "Do you print for MS-DOS programs?".
The printer wizard will display a message stating that "The Network Printer is off-line".
d.
This is OK. Continue the Add Printer Wizard until finished.
When finished, go to Start -> Settings -> Printers. The new printer icon will be grayed out
e.
indicating the printer is not ready.
Print Server 7-11