Wireless Settings; Identification; Figure 6-1. Wireless Settings Menu - NETGEAR FR114P Reference Manual

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall

Wireless Settings

To configure the Wireless interface of your firewall, click on the Wireless heading in the Main
Menu of the browser interface. The Wireless Settings menu will appear, as shown in
Figure 6-1. Wireless Settings menu

Identification

In the Identification section are the following parameters:
• Regulatory Domain
This field displays the region of operation for which the wireless interface is intended. It may
not be legal to operate the firewall in a region other than the region shown here.
• Station Name
This is the Account Name that was defined in the Basic Settings menu. Some Wireless status
screens may display this name as the Access Point in use.
• SSID (Service Set ID)
Enter a value of up to 32 alphanumeric characters. The same SSID must be assigned to all
wireless devices in your network. The default SSID is Wireless, but NETGEAR strongly
recommends that you change your network's SSID to a different value.
6-2
Figure 6-1:
Wireless