Hitachi Eco Compact PC-ARC-A Operation Manual page 35

NOTES:
•
The IR receiver function can only be used on the home screen.
•
The wired remote controller does not support "Differentiate Indoor Units Set Close Together" at the wireless
remote controller.
•
The wired remote controller does not support "Test Run" at the wireless remote controller.
•
When the wireless remote controller is in OFF status, even if the Operation Mode, Fan Speed, or Temperature
Setting is changed on the wireless remote controller, the settings on the compact remote controller will not
be changed because no signal is sent.
1. Set "IR Receiver" ON/OFF.
Step1. Enter "IR Receiver Setting" by selecting "0 6" as the item
number, refer to "5. Detailed Menu Operation".
Step2. Press " " or " " to switch the set valve between
"0 0"and "0 1" to set "IR Receiver" ON/OFF.
Details of set value are shown in the below table:
Set Value
0 0
0 1
Step3. Press " " to save the setting and the item number "0 6"
starts to flash.
Step4. Press " " (On/Off) once, or press "
return to the home screen.
Description
IR Receiver is OFF.
IR Receiver is ON.
" for 3 seconds to
5. Detailed Menu Operation
Set Value
Item No.
32