GE MEDICAL SYSTEMS
REV 5
SECTION 7
SERVICING THE BASE ASSEMBLY
7 1
Front Bumper
7 1 1
Remove Pads
ILLUSTRATION 7-1
REMOVAL OF BUMPER ASSEMBLY
CORNER PAD
(4) 10-32 x 1.25I BOLT
(2) 10-32 x 1.25I BOLT
This avoids damage to the front bumper when jacking up the AMX unit.
1. Remove the 10-32 x 1.25 inch bolts from each pad and remove the corner pads.
See Illustration 7-1.
2. Remove the 10-32 x 1.25 inch bolts and flat washers securing the front bumper
and remove the middle piece of the front bumper.
(2) FLAT
WASHER
MIDDLE
PIECE
7-1
(MODEL 2169360, 2236420 & 2275938 SERIES)
DIRECTION 2173225-100
FRONT CASTER YOKE
(4) 10-32 x 1.25I BOLT
AMX-4+ SERVICE
CORNER PAD