Troubleshooting - AEG DC 2 Instructions For Use Manual

TROuBLEShOOTING

Problem
The camera doesn't switch
on.
The camera keeps switching
off.
The memory card is not
detected.
The camera does not start
recording after switching on.
Video has no sound.
Possible cause
The car plug is not connected
to the cigarette lighter socket
or a 12 V socket in the vehicle.
The fuse in the car plug is
burnt out and needs to be
replaced.
The car plug is not correctly
seated in the cigarette lighter
socket or the 12 V socket in
the vehicle.
The memory card is not
formatted.
Memory card defective.
Memory card full (too many
protected recordings).
Audio recording is switched
off.
English
Solution
Plug the car plug into the
cigarette lighter socket or a
12 V socket in the vehicle.
Replace the defective fuse in
the car plug with a new fuse
(see "Replacing the fuse").
Verify the car plug is seated
correctly. The LED on the car
plug must be on.
Format the memory card
(see "Formatting the memory
card").
Check the memory card and
replace if necessary.
Check the memory card and
if necessary delete recordings
which are no longer required.
Enable audio recording (see
"Settings").
41