Functions - AEG DC 2 Instructions For Use Manual

34 www.aeg-automotive.com

FuNCTIONS

Automatic loop cycle recording
The device records in an endless loop.
When the memory card is full, the
oldest recordings which are not write
protected are erased. This ensures
there is always room and an adequate
recording history.
Acceleration sensor (G-Sensor)
The acceleration sensor detects rapid
acceleration and slowing (e.g. in an
accident). The camera protects the
active recording so the recording will
not be overwritten later.
Night vision
hold the MENu button whilst recording
to switch on the LED light.
Motion detection
When motion detection is active, the
camera automatically starts recording if
motion is detected with in the camera's
viewing angle.
Parking monitor
When the camera is not being powered
(e.g. whilst parked), the camera draws
power from the integrated battery and
switches to standby mode. If the acce-
leration sensor detects a collision, the
camera automatically starts recording.
Reversing camera
By switching the camera image on the
display you can use the rear facing
camera as a reversing camera, e.g.
picture-in-picture (see "Changing the
camera image").
ADAS assist systems
The camera features ADAS (Advanced
Driver Assistance Systems) smart assis-
tance systems. The systems assist the
drive and can help prevent accidents
due to inattentiveness.
LDWS lane departure warning system
The LDWS system (Lane Departure
Warning System) continuously monitors
the lane separator and warns the driver
when departing the lane.
Note:
The system must be calibrated prior
to first use to work correctly (see
"Calibrating the lane departure warning
system").
FCWS front collision warning system
The FCWS (Front Collision Warning
System) continuously monitors the
safety distance between your vehicle
and the vehicle in front of you. If the
distance is less than the calculated
safety distance, the system warns the
driver.