Normal Use; Contents; Technical Data - AEG DC 2 Instructions For Use Manual

Normal use

The DashCam is used to record events
(e.g. traffic) from the driver's perspec-
tive. Depending on the mode being
used it will either record film sequences
or take pictures.
It is powered via uSB cable.
Note:
The privacy of others is protected by
law. Recording third parties can be a
criminal offence. You are responsible for
your actions. Please obtain information
about the laws.
Using the device in traffic may be
subject to special local regulations in
the respective country.
This device is not intended to be used
by children or persons with reduced
physical, sensory or mental capabilities
or lack of experience and knowledge,
as they do not understand the resulting
dangers.
This device is not intended for com-
mercial use.
Any other use or modification of the
device is considered improper and
involves significant risks. The manufac-
turer assumes no liability for damages
due to improper use.

Contents

Be sure to verify contents immediately
upon opening the product. Check the
product and all parts for damage. Do
not use a defective product or parts.
•
Front facing camera
•
Rear facing camera with connecting
cable
•
Suction cup mount
•
uSB cable with 12 V car plug
•
Instructions For use
Please include all relevant documenta-
tion to other users!
The operating instructions are also
available at the following Internet
address:
http://iuqr.de/11232

Technical data

Model Dashcam DC 2
Item number 11232
Display 4.0 inch (10.16 cm)
IPS WDR display
lens 140° A+
high-resolution
ultra-wide angle
lens
Language multilingual
Video format MOV (h.264)
Video resolution up to 1296P
record mode loop cycle recording
English 27