AEG DC 2 Instructions For Use Manual page 31

• Always unplug the device
from the power source to
disconnect it when not
in use. Never pull on the
connecting cable!
Risk of injury!
Before installing the bac-
•
kup camera system and
before each functionality
test of the backup camera
system, secure the vehicle
to prevent it from rolling
away. Attention – risk of in-
jury and property damage!
Always engage the hand
brake and shift into gear!
Automatic transmissions
must be put into Park and
the hand brake engaged!
• Do not run or start the
vehicle while installing the
backup camera system!
Always follow safety
•
instructions if the vehicle
is on jacks or a car lift or
the like!
• Follow the automaker's
safety instructions and
manual!
• Only install the backup
camera system in a safe
environment! Keep clo-
thing, hair, limbs and the
backup camera system
away from moving and hot
engine- and car parts!
• When installing the device,
always be sure the safety
and functionality of other
systems and devices
inside the vehicle will not
be affected! Please note
the information inside the
automaker's manual.
If operation system mal-
•
functions and damage to
the backup camera system
occurs during operation,
immediately disconnect
the equipment from the
12 V vehicle power supply!
English 31