Insert A Microsd Card - Honeywell CK65 Series User Manual

Heater Setting
Preemptive Delay Time
Duration: Scanner heater
Duration: LCD heater
Fast monitoring interval
Slow monitoring interval
Power on time
Disable temperature
Blanking
Update
Default

Insert a microSD Card

You can use a microSD card to increase file storage capacity or to install software.
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC memory cards with the computer for maximum
performance and durability.
Note: Format the memory card before initial use.
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power off.
CK65 Mobile Computer User Guide
Description
Set the length of time (minutes) that the computer waits after the
Chill time has expired before activating the low power pre-heat
window feature.
Set the length of time (seconds) that the scanner window heater is
cycled on.
Set the length of time (seconds) that the touch screen heater is
cycled on.
Set sampling interval time (seconds) used once the computer
detects cold storage entry. Cold storage entry is defined by the
Heater enabled temperature.
Set sampling interval time (seconds) used once the computer
detects cold storage exit (defined by DeltaT value).
Set the length of time (milliseconds) between turning on heater
power and enabling a heater element. The default value is 10ms.
Set the temperature limit (°C) that triggers turning off the heater.
Tap check box to enable or disable heater operation during
scanning.
Tap to apply changes made to settings.
Tap to set the Heater settings back to their default values.
29