Advertisement
TROUBLESHOOTING
PROBLEM
Lights will not come on.
Lights come on during
the day.
Lights come on for no
apparent reason.
Lights flash on and off.
International Development Corp.
899 Henrietta Creek Rd. Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
POSSIBLE CAUSE
A. Light switch is turned off.
B. Fuse is blown or circuit breaker is turned off.
C. Incorrect circuit wiring.
D. Motion sensor head is not aimed correctly.
A. Motion sensor may be installed in a relatively dark
location.
B. Motion sensor is in TEST mode.
A. Motion sensor may be sensing moving objects
such as trees, traffic, etc.
B. Sensitivity may be set too high.
A. Heat or light from the lamp heads may be turning
the motion sensor on and off.
B. Heat being reflected from other objects may be
turning the motion sensor on and off.
© 2014 IDC, all rights reserved.
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with respect to this product.
This product is manufactured by International Development Corp.
SOLUTION
A. Turn light switch on.
B. Replace fuse or turn circuit breaker on.
C. Verify that fixture is wired properly.
D. Re-aim the motion sensor to cover the desired area.
A. Reposition motion sensor.
B. Slide AUTO/TEST switch to AUTO.
A. Reposition motion sensor.
B. Reduce sensitivity.
A. Reposition lamp heads away from the motion
sensor.
B. Reposition motion sensor.
7
Advertisement
