Installation; Installing The Mounting Bracket; Connecting The Wires - Honeywell NS003 Series Use And Care Manual

Dual stage motion security led light

INSTALLATION

CAUTION: Before beginning installation turn off the circuit breaker and light switch.

• This fixture is suitable for wall or eave mount only. Not suitable for ground mount installation. IMPORTANT: Do not use with dimmers or timers.

• Junction box is required for the assembly.

• For best performance, mount the fixture 8-12 feet above the ground.

CHOOSING THE MOUNTING STYLE

Wall Mount

Eave Mount

1. Thread the two screws (DD) through the mounting strap (C).

2. Place the gasket (B) over the screws (DD) and mounting strap (C).

1. Connect the house ground wire to the fixture ground (yellow/green) wire using the wire nut (BB).

2. Connect the fixture black wire to the house black wire and the fixture white wire to the house white wire using the wire nuts (BB).

NOTE: For proper connection, place the wire nut over wires and twist clockwise until tight.

Table of Contents