Snmpwalk - Cisco MARS Install And Setup Manual

snmpwalk

snmpwalk
The snmpwalk command loads an SNMP application that uses SNMP GETNEXT requests to query a
network entity for a tree of information.
To use snmpwalk, enter:
Syntax Description noneThe default behavior of this command displays the command's usage guidelines.
-hThe default behavior of this command displays the command's usage guidelines.
hostnameIdentifies the DNS name of the device against which the snmpwalk command will be run.
Typically, this device is a router or switch. This device must have SNMP management access enabled
and the MARS Appliance must be a valid management host.
communityIdentifies the community string for SNMP transactions.
objectIDAn object identifier (OID) may be given on the command line. This OID specifies which portion
of the object identifier space to search using GETNEXT requests. If no OID argument is present, the
snmpwalk command searches MIB-2.
Install and Setup Guide for Cisco Security MARS
A-66
snmpwalk [options...] <hostname> {<community>} [<objectID>]
Appendix A Command Reference
OL-14672-01