Maintenance - Makita DCJ205 Instruction Manual

— When using Battery BL1055B, press the power
button. The battery supplies DC 5 V, 1.5 A.
Battery BL1055B
Fig.16
► 1 . Power button 2. USB port
The USB cable can be placed inside the jacket or vest
for convenience using the hole in the pocket and the
cable holder.
For DCJ205 / DCJ206
1
Fig.17
► 1 . USB cable
1 2
12 ENGLISH
For DCV202
1
Fig.18
► 1 . USB cable

MAINTENANCE

CAUTION:
Always be sure that the jacket is
switched off and the battery cartridge is removed
before attempting to perform inspections or
maintenance.
CAUTION:
If the jacket does not switch on
or any fault is found with a fully charged battery
cartridge, clean the terminals of the battery holder
and the battery cartridge. If the jacket still does
not work properly, stop using the jacket and con-
tact our authorized service center.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.