Temperature Adjustment; Functional Description; Power Button - Makita DCJ205 Instruction Manual

The battery holder has an anti-drop function. When
removing the battery holder from the belt, pull up the
battery holder while pressing the unlock button.
Fig.10
► 1 . Unlock button
FUNCTIONAL
DESCRIPTION

Power button

To turn on the jacket or vest, connect all the cables,
press the power button on the battery or battery holder,
and then press and hold the power button on the jacket
or vest for a few seconds. To turn off, press and hold the
power button on the jacket or vest.
NOTE: The power level indicator on the battery
holder is not used with the jacket or vest. Only the
power level indicator 4 will light up when using the
jacket or vest.
Fig.11
► 1 . Power button 2. Power level indicator
NOTE: The battery and the battery holder automati-
cally turns off approximately 1 hour after the jacket or
vest is turned off.
1
2 1

Temperature adjustment

There are three temperature settings (high, medium,
low). When you switch on the jacket or vest, the tem-
perature is set to "high". Each time you press the power
button, the temperature setting changes as shown in
the figure. The color of the power button shows the
current setting.
1
Fig.12
► 1 . Red: "high" 2. White: "medium" 3. Blue: "low"
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
Fig.13
► 1 . Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for a few seconds.
Indicator lamps
Lighted
(For 14.4 V and 18 V batteries only)
10 ENGLISH
2
1
Off Blinking
3
2
Remaining
capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.