Honeywell C7110C1040 Manual page 7

LED BEHAVIORS AND MEANINGS
Table 1. Service-LED behaviors and their meanings
service LED modes
"Sensor Output" (S.O.) +
1 flash / sec for
"Relay Output" (R.O.)
90 sec
modes
2 flashes / sec
S.O. + R.O.
for 10 sec
Dark S.O.
Lit continuously S.O.
Dark S.O.
Dark S.O.
Flashing R.O.
Lit continuously R.O.
-- S.O. + R.O.
-- S.O. + R.O.
OCC. BYPASS BUTTON (C7110C1080, ONLY)
AND CALIBRATION LED
The functionality of the occupancy bypass button
(C7110C1080, only) and the corresponding behavior of the
calibration LED are dependent upon the programming of the
connected controller. Please refer to the controller's technical
literature and/or application.
C7110C1040 AND C7110C1080 WALL MODULES – PRODUCT DATA
remarks
Calibration warm-up
Calibration in
progress
Calibration
successful
Calibration failed
CO2 < 1000 ppm
CO2 > 1000 ppm
CO2 < threshold
CO2 > threshold
ABC ON
ABC OFF
7 EN0B-0775GE51 R0619