Fb Details - Mitsubishi Electric MELSEC iQ-F Series Manual

No. Variable name Name
(9) i_uConvSpeed Waveform output
conversion cycle
constant
(10) i_uUnitType Module type
Output label
No. Variable name Name
(11) o_bENO Execution status
(12) o_bOK Normal completion
(13) o_bErr Error completion
(14) o_uErrId Error code

FB details

Available device
■Analog output module
Target module
FX5-4DA
■CPU module
MELSEC iQ-F series
Basic specifications
Item
Language
Number of steps
The amount of label usage
The number of index register
usage
The amount of file register usage
FB dependence
FB compilation method
FB operation
Data type
Word [Unsigned]/Bit
String [16-bit]
Word [Unsigned]/Bit
String [16-bit]
Data type
Bit
Bit
Bit
Word [Unsigned]/Bit
String [16-bit]
Firmware Version

Description
Ladder diagram
295 steps
The number of FB steps integrated in the program varies depending on the CPU module used, the input/output definition,
and the setting options of GX Works3. For the setting options of GX Works3, refer to GX Works3 Operating Manual.
• Label: 0.01 K point (Word)
• Latch label: 0 K point (Word)
The amount of labels used in the program varies depending on the CPU module used, the device specified in an argument
and the option setting of GX Works3. For the option setting of GX Works3, refer to GX Works3 Operating Manual.
• Index register:0 point
• Long index register:0 point
0 point
No dependence
Macro type
Pulsed execution (single scan execution type)
Range Description
1 to 5000 Sets the constant that defines the conversion cycle of
wave output.
0: FX5-4DA Specifies a module type.
Default value Description
OFF ON: The execution command is ON.
OFF: The execution command is OFF.
OFF The on state indicates that setting the wave output has
been completed.
OFF The on state indicates that an error has occurred in the
FB.
0 The error code of an error occurred in the FB is stored.
Engineering tool
GX Works3 Version 1.040S or later
3 ANALOG OUTPUT MODULE FB
3.3 M+FX5-4DA_WaveOutputSetting (Waveform output setting)
3
29