Fb Details - Mitsubishi Electric MELSEC iQ-F Series Manual

FB details

Available device
■Analog input module, Multiple input module
Target module
FX5-4AD
FX5-8AD
■CPU module
MELSEC iQ-F series
Basic specifications
Item
Language
Number of steps
The amount of label usage
The number of index register
usage
The amount of file register usage
FB dependence
FB compilation method
FB operation
Processing
• Turning on i_bEN (execution command) allows the settings of all channels to be enabled. For what settings are enabled,
refer to the following manuals.
For the analog input module setting procedure, refer to MELSEC iQ-F FX5 User's Manual (Analog Control - Intelligent
function module).
For the multi-input module setting procedure, refer to MELSEC iQ-F FX5 User's Manual (Analog Control - Intelligent
function module).
• This FB continues its execution until the completion of the settings of each function after i_bEN (execution command) turns
on.
Timing chart of I/O signals
Operating condition setting request
Operating condition setting completed
2 ANALOG INPUT MODULE, MULTIPLE INPUT MODULE FB
12
2.1 M+Model_RequestSetting (Validation of settings)
Firmware Version


Description
Ladder diagram
57 steps
The number of FB steps integrated in the program varies depending on the CPU module used, the input/output definition,
and the setting options of GX Works3. For the setting options of GX Works3, refer to GX Works3 Operating Manual.
• Label: 0.01 K point (Word)
• Latch label: 0 K point (Word)
The amount of labels used in the program varies depending on the CPU module used, the device specified in an argument
and the option setting of GX Works3. For the option setting of GX Works3, refer to GX Works3 Operating Manual.
• Index register:0 point
• Long index register:0 point
0 point
No dependence
Macro type
Pulsed execution (multiple scan execution type)
i_bEN
o_bENO
(Un\G70.b9)
(Un\G69.b9)
o_bOK
o_bErr
o_uErrId
Engineering tool
GX Works3 Version 1.040S or later
GX Works3 Version 1.040S or later
0