M+Model_Setloggingparam (Logging Function Setting); Overview; Labels - Mitsubishi Electric MELSEC iQ-F Series Manual

2.3
M+Model_SetLoggingParam (Logging function
setting)
No. Name
1 M+FX5-4AD_SetLoggingParam
2 M+FX5-8AD_SetLoggingParam

Overview

Turning on i_bEN (execution command) allows the logging function of a specified channel to be set.
M+FX5-4AD_SetLoggingParam
(1) B : i_bEN
(2) DUT i_stModule
:
(3)
UW : i_uCH
(4) B : i_bLogEnable
(5) UW : i_uLogData
(6) UW : i_uLogCycleVal
(7) UW : i_uLogCycleUnit
(8) UW : i_uLogPoints
(9) UW : i_uLogTrigCond
(10) UW : i_uLogTrigData
(11) W : i_wLogTrigValue
(12) UW : i_uUnitType

Labels

Input label
No. Variable name Name
(1) i_bEN Execution command
(2) i_stModule Module label
(3) i_uCH Target channel
(4) i_bLogEnable Logging enable/
disable setting
(5) i_uLogData Logging data setting
o_bENO : B (13)
o_bOK : B (14)
o_bErr B (15)
:
(16)
o_uErrId : UW
Data type Range
Bit ON, OFF
Structure The setting range
differs depending on
the module label.
Word [Unsigned]/Bit
■FX5-4AD
String [16-bit] 1 to 4
■FX5-8AD
1 to 8
Bit ON, OFF
Word [Unsigned]/Bit 0: Digital output
String [16-bit] value
1: Digital operation
value
2 ANALOG INPUT MODULE, MULTIPLE INPUT MODULE FB
Target module
FX5-4AD
FX5-8AD
Description
ON: The FB is activated.
OFF: The FB is not activated.
Specifies the module label for the analog input/multiple
input module.
Specifies a channel number.
ON: Enables the logging function.
OFF: Disables the logging function.
Sets the data to be logged.

2.3 M+Model_SetLoggingParam (Logging function setting)

2
17