Advertisement
Polarising Plate (not supplied)
The purpose of the polarising plate is to ensure that the sensor does
not rotate from the correct position, i.e. pointing vertically
downwards, during transport or installation.
The two overall dimensions marked 'SEE TEXT' need to be made
such that when the plate is positioned against the inner face of the
luminaire end cap, it cannot rotate.
The 3.5mm 'tab' should be located closest to the ceiling (away from
the lamp). The 6.0mm slot is optional and is to allow the wires to
pass through for ease of assembly.
Material can be plastic sheet, minimum thicknesss 1.0mm,
recommended thickness 1.5-2.0mm, or mild/stainless steel sheet,
minimum thickness 0.6mm, recommended thickness 1.0-1.6mm.
Electrical Connections
Fig.6
Blue
Brown
White
White
Note: White/White
Dimming Signal
Pair is Polarity Free.
Fig.7
SUPPLY
L N E
D D
L N E
D D
BALLAST
See 'Technical Data' on back page for
maximum number of ballasts
Always check product label before connecting.
Do not connect the
Dimming Signal Pair
of one detector to that
of another detector.
L N E
D D
BALLAST
BALLAST
- 3 -
SEE TEXT
3.5
6.0
Fig.5
L N E
D D
L N E
BALLAST
20
Advertisement
