Makita 3706 Instruction Manual page 9

2
3
1
1. Shoe
2. Circular guide
3. Projections
2
1
1. Shoe
2. Circular guide
3. Thumb screw
OPERATION
3
2
1. Knob
2. Tighten
3. Loosen
1
1. Knob
OPERATION
Align the projections in the circular guide with the grooves in
001632
the shoe, and secure the shoe and circular guide using the
thumb screw.
To adjust the cutting depth, proceed first by loosening the
001633
thumb screw and then by sliding the shoe and circular guide
together. After completion of the adjustment, tighten the
3
thumb screw securely.
Operation
001634
Loosen the knob, and adjust its position in accordance with
1
the size of the circle to be cut. (The hole dimensions to be cut
are indicated on the side of the circular guide as a general
guideline.) After completion of the adjustment, tighten the
knob securely.
Insert the end of the knob into the center of the circle to be
001635
cut, and proceed to cut in a clockwise direction.
9