Advertisement
ART500
Two-Way Speaker System
Architects' & Engineers' Specifications
The loudspeaker shall be a self-contained unit,
housed in a vented, reinforced polypropylene enclo-
sure and consisting of: (1) a 15 inch low-frequency,
cone driver having at least a 4 inch voice coil, (2) an
80° x 60°, high-frequency, constant-directivity poly-
nomial horn and horn-loaded, 2 inch compression
driver having a titanium diaphragm and compen-
sated for horn resonance and ringing, (3) passive
crossover network.
The drivers shall be crossed over at 1.8kHz by a
2-pole, passive network that contains equalization
for the constant directivity horn and shall present
a nominal 8Ω load to the power amplifier. When
measured (1kHz–10kHz) the directivity factor shall
be at least 10.7. The loudspeaker shall be capable
of operating continuously with a pink noise signal
delivered at 500W RMS. It shall produce at least
100dB SPL (300Hz–3kHz) at 1m with an input of 1W
RMS and its peak power handling capability shall not
be less than 2000W Peak, producing 133dB SPL (1m,
anechoic). The nominal frequency response of the
system shall be 70Hz–17kHz ±3dB.
The reinforced polypropylene enclosure shall
have a volume of at least 2.64 cu. ft., be trapezoidal
shaped and equipped with a grille to protect the cone
driver. Two Neutrik Speakon
provided for input and input loop-through. At least
four M10 and two M8 threaded sockets and a stand
socket shall be molded into the cabinet for attaching
mounting hardware, designed for the unit and avail-
able from the manufacturer. The loudspeaker system
shall be a model ART500 manufactured by Mackie
Industrial.
www.mackieindustrial.com
16220 Wood-Red Rd NE, Woodinville, WA 98072 USA
888.337.7404, fax 425.487.4337, industrial@mackie.com
UK
+ 44 1268 570 808, fax + 44 1268 570 809, industrial@rcf-uk.com
ITALY
+39 0522 354 111, fax +39 0522 332 294, industrial@rcf.it
FRANCE
+33 3 8546 9160, fax +33 3 8546 9161, industrial@rcf.fr
GERMANY
+49 2572 96042 0, fax +49 2572 96042 10, industrial@mackie.de
connectors shall be
®
Electronic files for this product available at:
www.mackieindustrial.com
This Specification Sheet
Architects' & Engineers' Specifications ART500AE.TXT
Quick-Start Manual
Owner/Operator's Manual
CADD files
EASE data
Mackie Designs continually engages in research related to product improvement. New material,
production methods, and design refinements are introduced into existing products without notice
as a routine expression of that philosophy. For this reason, any current Mackie Industrial product
may differ in some respect from its published description, but will always equal or exceed the
original design specifications unless otherwise stated. ©1999-2000 Mackie Designs Inc. All
rights Reserved.
and
are registered trademarks of Mackie Designs Inc. Mackie
Industrial is a trademark of Mackie Designs Inc.
ART500.PDF
ART500QS.PDF
ART500ML.PDF
ART500.DXF
ART500.EAS
part no. 910-171-10
6
O F 6 P A G E S
Advertisement
