Advertisement
Quick Links
ART Series
Careful acoustic design and advanced materials
have resulted in an exceptional full range, full fidelity,
self-contained sound system. The ART300A provides
an ideal combination of high power, low distortion
and wide bandwidth for permanent installations.
The two-way design consists of a 12" woofer
that uses a massive magnet structure for accurate
bass reproduction and a CD horn loaded to a 1"
exit compression driver. The CD horn is a part of the
molded enclosure. Two discrete power amplifiers
and an electronic crossover are matched to the two
transducers and provide time correction, CD horn
compensation and peak-limiting, as well as over-
excursion and thermal protection.
The ART300A will accept a balanced or unbal-
anced (switch selected) microphone or line input,
adjusted by a single rotary control.
All components are housed in a lightweight,
vented enclosure formed from polypropylene that is
extremely rigid and is weather resistant. The woofer
is protected by a metal grille. All controls and con-
nectors are recessed on the rear. A 1-3/8" stand
socket and M10 threaded inserts are molded into the
cabinet to provide quick and easy installation using
specially designed accessory mounting hardware.
This Mackie Industrial product is covered by
an exclusive, one-time NO FAULT repair policy in
addition to a five year, limited warranty.
ART300A
Two-Way Active Speaker System
Features
90° x 70° constant-directivity horn with
1" exit compression driver
12" high-efficiency woofer
Internal bi-amplifier: 300W LF, 60W HF, and
driver-optimized electronic crossover
Switchable, balanced mic/line input
Total system protection: over-excursion,
thermal, short circuit and peak limiting
Compact, lightweight polypropylene enclosure
Built-in hand grip, M10 fly points and stand
socket
Optional installation accessories include hard-
ware for truss, grid, pipe and adjustable wall
mounts
Exclusive Mackie Industrial — one-time NO
FAULT repair policy
Five year, limited warranty
Live Sound/Music Reinforcement
High-Level AV Playback
Large Speech Systems
Active Floor Monitors
1
O F 6 P A G E S
Advertisement
Related Manuals for Mackie Art Series ART300A
Summary of Contents for Mackie Art Series ART300A
- Page 1 M10 threaded inserts are molded into the cabinet to provide quick and easy installation using specially designed accessory mounting hardware. This Mackie Industrial product is covered by an exclusive, one-time NO FAULT repair policy in addition to a five year, limited warranty.
-
Page 2: Specifications
ART300A Two-Way Active Speaker System Specifications System Acoustic Frequency Range (–10 dB): Frequency Response (–3 dB): Horz. Coverage Angle (–6 dB): Vert. Coverage Angle (–6 dB): Directivity Factor; Q (DI): 10.0 (10.0), averaged System Sensitivity Rated Maximum Peak Crossover: 1.8kHz, 24dB/octave,... - Page 3 ART300A Two-Way Active Speaker System ART300A Vertical Polars O F 6 P A G E S 200Hz 250Hz 0˚ 315Hz 400Hz 1.25kHz 1.6kHz 0˚ 2kHz 2.5kHz Vertical Off-Axis Frequency Response (UP) 8kHz 10kHz 0˚ 12.5kHz 16kHz Vertical Off-Axis Frequency Response (DOWN)
- Page 4 ART300A Two-Way Active Speaker System ART300A Horizontal Polars 0˚ 0˚ 0˚ O F 6 P A G E S 200Hz 250Hz 315Hz 400Hz 1.25kHz 1.6kHz 2kHz 2.5kHz Horizontal Off-Axis Frequency Response 8kHz 10kHz 12.5kHz 16kHz 0˚ 500Hz 630Hz 800Hz 1kHz 0˚...
- Page 5 7.44" (189mm) 3.58" (91mm) 7.36" (187mm) 12.29" (312mm) BOTTOM 15.36" (390mm) 24.42" (620mm) (565.2mm) FRONT O F 6 P A G E S Two-Way Active Speaker System Directivity Index 12.29" (312mm) 8.35" (212mm) 14.22" (361mm) VOLUME OPERATE LIMIT. MUSIC 10.20" (259mm)
- Page 6 For this reason, any current Mackie Industrial product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.