1.4
Separately-sold Parts
The e-CON or MIL connector type module requires a plug of connector for power supply and FG.
The following table lists the applicable plugs.
Model name of
Product name
Mitsubishi
product
A6CON-PW5P
One-touch connector
plug for power supply
A6CON-PW5P-
*1*3*4
and FG
SOD
Online connector for
power supply and
A6CON-PWJ5P
*2
FG
*1
One order of Mitsubishi A6CON-5P includes 10 plugs.
*2
One order of Mitsubishi A6CON-J5P includes 5 plugs.
*3
One-touch connector plugs cannot be reused once crimped.
*4
Check the outer diameter of the applicable cable before selecting a connector.
*5
The allowable current value of the cable connected must be observed.
1.5
Recommended Connector List
The following table lists the sensor connector (e-CON). For the wiring method of the sensor connector (e-CON), refer
to the catalogs of each manufacturer.
Model name
ECN-M014R
ECN-M024Y
ECN-M034OR
Mitsubishi Electric System & Service Co., Ltd.
ECN-M044GN
ECN-M054BL
ECN-M064GY
Parts model
(manufacturer)
35505-6080-A00 GF
0.75
(3M Company)
(0.66 to 0.98)
(18 AWG)
0.16mm or larger for
strand diameter
35505-6180-A00 GF
Insulating coating
(3M Company)
material PVC (heat
resistant vinyl)
35720-L200-A00 AK
(3M Company)
Manufacturer
Core wire size of
applicable cable
0.14 to 0.30
(26 to 24 AWG)
0.30 to 0.50
(22 to 20 AWG)
Specifications
Outer diameter
Core wire size of
of applicable
applicable cable
cable
2.2 to 3.0mm
2.0 to 2.3mm
Specifications
Outer diameter of
applicable cable
0.8 to 1.0mm
1.0 to 1.2mm
1.2 to 1.6mm
1.0 to 1.2mm
1.2 to 1.6mm
1.6 to 2.0mm
CHAPTER 1 PRODUCT LINEUP
Cover color
Maximum rated
current
Gray
*5
7A
Blue
Cover color
Maximum rated
current
Red
Yellow
Orange
2.0A
Green
Blue
Gray
19
1