RESETTING THE A-10/A-11
You should reset the A-10/A-11 whenever you suspect some external abnormality has caused it to mal-
function.
Normal Reset
Performing the reset operation when the A-10/A-11 is hung up or experiencing other operational problems
but no corruption of memory contents resets the A-10/A-11 without affecting memory contents or settings.
A normal reset causes the Desktop to appear on the screen.
Memory Reset
Performing the reset operation after memory data has been corrupted clears memory contents and set-
tings, and causes the welcome wizard screen to appear. Set up the A-10/A-11 in accordance with the on-
screen guidance.
To reset the A-10/A-11
1. Press the power switch to turn on the A-10/A-11.
2. Use the stylus to press the reset button.
This causes the A-10/A-11 to turn off.
Important!
• Always use the stylus that comes with the A-10/A-11 whenever performing any touch screen operation.
Using any other object can result in damage to and malfunction of the A-10/A-11.
3. Turn the A-10/A-11 back on to resume the reset operation.
RESET
— 11 —