Table of Contents
Advertisement
DESKTOP COMPUTER SYSTEM CONFIGURATION
You should check to make sure that the configuration of your desktop computer is as described below to
support the installer and the software applications contained on the CD-ROM.
Minimum Requirements:
Desktop computer with a 486/33DX or higher processor (Pentium P90 recommended)
Microsoft Windows 95 (U.S. Version) or later operating system (will not run on earlier versions of Win-
dows or Windows NT)
8MB of memory (12MB recommended)
10 - 20 MB of available hard disk space (actual requirements will vary based on features you choose to
install and current system configuration)
Available 9 or 25 pin Communications Port (adapter required for 25 pin communication port)
One CD-ROM drive (3.5" high-density disks provided on request)*
VGA or higher resolution graphics card (SVGA 256-color recommended)
Microsoft Mouse or compatible pointing device
Options:
Audio card/speakers for sound
SETTING UP
Use the following procedure to set up the A-10/A-11 before using it for the first time.
1. Load batteries.
Load the two alkaline batteries that come with the A-10/A-11 into its main battery holder.
After loading the main batteries, pull the insulating tape out from under the back-up battery compartment
cover.
2. Turn on power.
Press the power switch to turn on power.
3. Set up the A-10/A-11.
The welcome wizard appears on the screen after the reset routine is complete. Perform the following
procedures in accordance with the guidance messages that appear on the screen.
Touch screen calibration
Time and date setting
Personal data input
Other settings
— 7 —
Hide quick links:
Advertisement
Table of Contents
