Rename, Share, Or Unpair A Paired Device; About The Scanner Edge App - Honeywell CN80 Series User Manual

Rename, Share, or Unpair a Paired Device

You can rename a paired device to make it easier to identify on the list or unpair the
device to remove it from the paired list.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Take one of the following actions:

About the Scanner Edge App

Your mobile computer is equipped to communicate with scanners using Bluetooth
technology through the Scanner Edge app. The Bluetooth radio must be turned
On. System bar icons indicate Bluetooth radio status.
To turn On the Bluetooth radio:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap Use Bluetooth to toggle the Bluetooth radio On or Off.
Connect a Bluetooth Scanner
To connect to a Bluetooth scanner, the Bluetooth radio must be turned on and then
scan a pairing barcode with the Bluetooth scanner.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Scanner Edge
3. Tap the menu icon
4. For Honeywell branded scanners tap Honeywell or for Intermec branded
5. Scan the Connect Barcode displayed on screen.
88
> Connected devices > Previously connected devices.
next to the paired device.
• To rename the device, tap the Edit icon
RENAME.
• To allow Contact Sharing, tap the check box next to the setting.
• To unpair the device, tap FORGET.
> Connected devices > Connection preferences > Bluetooth.
scanners tap Intermec.
.
and then tap Pair BT Scanner.
CN80 Mobile Computer Series User Guide
, type the new name, and then tap