Honeywell CN80 Series User Manual page 52

Icon
Dolphin Power Tools
42
Application
Demos
HUpgrader
Scanner Edge
SIM Selection
BattMon
ConfigApps
Configure Autorun
Diagnostic Information
EZConfig
WiFi Diagnostic
Description
Honeywell Demo apps demonstrate the basic capabilities of
the computer and are not intended as functional business
solutions. The demos included, demonstrate scanning,
signature capture, NFC functionality, and printing via
Bluetooth technology.
Information on how to create custom applications for your
Honeywell mobile computer can be found in the Honeywell
Software Development Kit (SDK) for Android, available from
the Technical Support Downloads Portal.
Use the HUpgrader app to view the current OTA version on
the computer, check for updates, or initiate an OTA upgrade
from storage.
Use the application to:
• View connected devices.
• Pair with a Bluetooth Scanner.
• Disconnect a Bluetooth Scanner.
The SIM Selection app only appears on CN80L1N models
equipped with dual SIM slots. Use the app to configure and
switch between two SIM cards installed in the computer.
BattMon provides information on the charge status and
health of the battery, and provides access to activate battery
status notifications and battery charging history logs.
The ConfigApps Power Tool gives you the ability to enable or
disable apps installed on the computer and to uninstall app
updates that may be causing storage or performance issues.
You can also view the total number of apps on the computer
and the total number of apps currently disabled.
Configure Autorun provides the ability to set applications to
automatically run after a reboot.
Diagnostic Information provides access to system statistics,
notifications, and version information about the computer.
EZConfig supports advanced customization and
configuration of the computer. EZConfig includes a standard
XML editor and configuration barcode scanner feature.
Use the application to:
• View Wi-Fi radio status information about a connected
access point or a list of other available access points in
range of the Wi-Fi radio.
• Use the Route utility to view packet destination gateway
information across the subnets.
• Use the IPConfig utility to view IP parameters for the on-
board network adapters.
• Use the Ping utility to verify communication links or to
make sure a specific IP address is working.
CN80 Mobile Computer Series User Guide