Table of Contents
Advertisement
5.14.14.
Installing the protection cover
Prerequisites:
Tools: cross-head screwdriver
1. Take the protection cover, the screws and the washers that were previously removed
in Removing the protection cover on Page 73.
2. Place the protection cover (A) back over the DC contactors and secure it with the
screws (B) combined with the washers (C).
3. Reconnect the plugs of the fans' power supply cables.
Document: v0.4 / Document No.: TBA | Date: 11-08-2021
Mounting the protection cover
Attaching the protection cover with screws
HVC-R 100/150 E-Bus Charger Installation Guide
Page 107 of 131
Advertisement
Table of Contents
