Chapter 5: Software Installation And Configuration For Windows 98Se, Me, And 2000; Overview; Instructions For Windows 98Se, Me, And 2000 - Linksys WUSB12 User Manual

Chapter 5: Software Installation
and Configuration for Windows
98SE, Me, and 2000

Overview

The Wireless Compact USB Adapter Setup Wizard will guide you through the
installation procedure for Windows 98SE, Me, and 2000. The Setup Wizard
will install the WLAN Monitor and Device Driver, as well as configure the
Adapter.
Important for Windows XP users: Do NOT run the Wireless
Network Adapter Setup Wizard. Proceed directly to "Chapter 6:
Connecting the Wireless Compact USB Adapter."
Important for Windows 98SE, Me, and 2000 users: You must run
the Setup Wizard to install the software before installing the hardware.
Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup
Wizard should run automatically, and Figure 5-1 should appear. If it does not,
click the Start button and choose Run. In the field that appears, enter
D:\setup.exe (where "D" is the letter of your CD-ROM drive).
8
Instant Wireless
Figure 5-1
Wireless Compact USB Adapter
™ Series
• Install - Click the Install button to begin the software installation process.
• User Guide - Click the User Guide button to open the PDF file of this User
Guide.
• LINKSYS Web - Click the LINKSYS Web button to access the Linksys
website using an active Internet connection.
• Exit - Click the Exit button to exit the Setup Wizard.

Instructions for Windows 98SE, Me, and 2000

1. To install the Adapter, click the Install button on the Welcome screen.
2. After reading the License Agreement, click the Next button if you agree, or
click the Cancel button to end the installation.
Figure 5-2
9