Appendix A: Troubleshooting; Common Problems And Solutions - Linksys WMP200 User Manual

Wireless-G Business PCI Adapter with RangeBooster

Appendix A: Troubleshooting

This appendix consists of two parts: "Common Problems and Solutions" and "Frequently Asked Questions." This
appendix provides solutions to problems that may occur during the installation and operation of the Wireless-G
Business PCI Adapter. Read the description below to solve your problems. If you can't find an answer here, check
the Linksys website at www.linksys.com.

Common Problems and Solutions

1. The Wireless-G Business PCI Adapter does not work properly.
• Reinsert the Wireless-G Business PCI Adapter into your PC's PCI slot.
• Right click on My Computer and select Properties. Select the device manager and click on the Network
Adapter. You will find the Wireless-G PCI Adapter with RangeBooster if it is installed successfully. If you
see the yellow exclamation mark, the resources are conflicting. You will see the status of the Wireless-G
PCI Adapter with RangeBooster. If there is a yellow question mark, please check the following:
• Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.)
• Make sure that you have inserted the right adapter and installed the proper driver.
If the Wireless-G Business PCI Adapter does not function after attempting the above steps, remove the
adapter and do the following:
• Uninstall the driver software from your PC.
• Restart your PC and repeat the hardware and software installation as specified in this User Guide.
2. I cannot communicate with the other computers linked via Ethernet in the Infrastructure
configuration.
• Make sure that the PC to which the Wireless-G Business PCI Adapter is associated is powered on.
• Make sure that your Wireless-G Business PCI Adapter is configured on the same channel and with the
same security options as with the other computers in the Infrastructure configuration.
Appendix A: Troubleshooting
Common Problems and Solutions
61