Linksys WMP200 Quick Installation

Wireless-G
Business PCI
Adapter
with RangeBooster
Package Contents
• Wireless-G Business PCI Adapter
with RangeBooster
• Setup Wizard CD-ROM
• User Guide on
CD-ROM
• Quick Installation
QUICK INSTALLATION
BUSINESS SERIES
Model No. WMP200 Model No.
Model No.
1
Begin Installation
IMPORTANT: Do not connect the Adapter to your
PC until you are instructed to do so in Step 2 or
the Adapter will not install correctly.
The PCI Adapter is set up using the
Setup Wizard that comes on the
enclosed CD.
A
To begin, insert the Setup
Wizard CD-ROM into your
CD-ROM drive. The Setup
Wizard should run
automatically, and the
Welcome screen should
appear.
B
To install the Adapter, click
Click Here to Start on the B
Welcome screen.
C
After reading the License
Agreement, click Next to
begin the installation and
Windows will copy the files
onto your PC.
It may take a minute for the
next screen to appear.
C
D
This screen will inform you
that the next screen will ask
you to turn off your PC. Click
Next.
D
E
When this screen appears,
select Yes, I want to power
off my computer now. Then,
click Finish.
E
F
After your PC powers off,
unplug your PC from power.
Proceed to Step 2.
2
Connect the Adapter
A
Open your PC case and locate
an available PCI slot on the
motherboard. Check with
your computer's
manufacturer for instructions.
B
With the connector side
facing in, insert the PCI
Adapter into the PCI slot.
Adapter
Make sure that all of its pins
are touching the slot's
Installation Example
contacts. You may have to
apply a bit of pressure to slide
the adapter all the way in.
After the adapter is firmly in
place, secure its fastening tab
to your PC's chassis. Then,
close your PC and plug it back
into the power.
C
Attach the external antennas
to the adapter's antenna
connectors. Bend the
antennas up ninety degrees,
then spread them apart
ninety degrees, so they make
a V or L shape.
D
Power on your desktop PC,
then continue with the Setup
Wizard.
Proceed to Step 3.