Troubleshooting; Common Problems And Solutions; Frequently Asked Questions - Linksys WMP11 User Manual

3. Highlight Protocol and click
the Add button.
4. Select Microsoft
from the list of
"Manufacturers"
and TCP/IP from
the list of "Network
Protocols" and
click the OK but-
ton.
5. Repeat steps two through four to install other protocols such as NetBEUI or
IPX/SPX.
From the screen in step two,
you can also press the
Properties button. From this
screen, you can verify that
the drivers are working under
Enhanced Mode on the
Driver Type tab or reconfig-
ure the card on the Advanced
tab.
At this point, you must
restart your computer.
Installation is complete.
38
Instant Wireless TM Series
Wireless PCI Card

Troubleshooting

Common Problems and Solutions

This chapter provides solutions to problems usually occurring during the instal-
lation and operation of the Wireless PCI Card. Read the description below to
solve your problems. If you can't find an answer here, check the Linksys web-
site at www.linksys.com.
1. The Wireless PCI Card does not work properly.
• Reinsert the Wireless PCI Card into your PC's PCI slot.
• Right click on My Computer and select Properties. Select the device man-
ager and click on the Network Adapter. You will find the Wireless PCI Card
if it is installed successfully. If you see the yellow exclamation mark, the
resources are conflicting. You will see the status of the Wireless PCI Card. If
there is a yellow question mark, please check the following:
• Make sure your PC has a free IRQ.
• Make sure you have inserted the right card and installed the proper
driver.
If the Wireless PCI Card does not function after attempting the above steps,
remove the card and do the following:
• Uninstall the driver software from your PC.
• Restart your PC and repeat the hardware and software installation as
specified in this User Guide.
3. I cannot communicate with the other computers linked via Ethernet in
the Infrastructure configuration.
• Make sure that the notebook PC to which the Wireless PCI Card is associat-
ed is powered on.
• Make sure that your Wireless PCI Card is configured on the same channel
and with the same security options as with the other computers in the
Infrastructure configuration.

Frequently Asked Questions

Can I run an application from a remote computer over the wireless net-
work?
This will depend on whether or not the application is designed to be used over
a network. Consult the application's user guide to determine if it supports oper-
ation over a network.
39