Linksys WDT11 User Manual page 33

8. Select Power Save Mode and
select either "Enabled" or
"Disabled". "Disabled" will
allow for uninterrupted data
communication. Selecting
"Enabled" allows your note-
book to enter "sleep" mode
and could interrupt data com-
munication. For further infor-
mation about Power Save
Mode, see the chapter entitled
Configuration Utility.
9. The setting for Use Wep
should be either "Disabled"
or "Mandatory". Wired
Equivalent Privacy (WEP) is
an encryption scheme used to
protect wireless data commu-
nication. The "Disabled" set-
ting prevents the sharing of
data with other computers on
a WEP Network. For data
sharing to be enabled, select
"Mandatory".
59
Instant Wireless Series
TM Network PC Card and PCI Adapter
10. The ATIM Window should
remain Disabled as set by
default. Changing the setting
of the ATIM Window may
reduce performance.
11. The Listen Interval setting
should remain at 1 Beacon
per Second. Setting this
higher could result in slower
connection speeds.
60