Linksys WDT11 User Manual page 11

3. Installation will begin and you will reach the screen shown below. You will
want to select the box that reads Wired to the network since you are adding
network hardware. Then, click the Next button to continue.
4. The next screen will not show any Network Adapters installed on your sys-
tem, which signifies that no network hardware has been previously installed.
You will want to click the Select from list button to continue.
15
Instant Wireless Series
TM
Network PC Card and PCI Adapter
5. A list of adapters will appear on the next screen. You will not want to select
one of these, however, as your Setup Utility CD has all of the appropriate
drivers. Click the Have Disk button to continue.
6. On the Insert Disk screen, type "D:\WPC11- WDT11\ WINNT" (where D: is
the letter of your CD-ROM drive) in the field provided. Then, click the OK
button to continue.
7. The Select OEM Option screen will show two options from which to
choose. You will want to highlight Instant Wireless - Network PCI Card
and click the OK button to continue.
16