Linksys WDT11 User Manual page 22

3. Installation will begin and you will reach the screen shown below. You will
want to select the box that reads Wired to the network since you are adding
network hardware. Then, click the Next button to continue.
4. The next screen will not show any Network Adapters installed on your sys-
tem, which signifies that no network hardware has been previously installed.
You will want to click the Select from list button to continue.
37
Instant Wireless Series
TM
Network PC Card and PCI Adapter
5. A list of adapters
will appear on the
next screen. You
will not want to
select one of these,
however, as your
installation disk
(Setup Utility CD)
has all of the appro-
priate drivers. Click
the Have Disk but-
ton to continue.
6. When the Insert
Disk screen appears,
type "D:\WPC11-
WDT11\WINNT"
(where D: is the let-
ter of your CD-ROM
drive) in the field
provided. Then, click
the OK button to
continue.
7. The Select OEM
Option screen will
show two options
from which to
choose. You will
want to highlight
Instant Wireless -
Network PC Card
and click the OK
button to continue.
38